久久成人午夜电影mp4-久久成人无码国产免费播放-久久成人免费观看全部免费-久久成人免费观看草草影院-一道精品视频一区二区三区-一道精品视频一区二区

Lift check valve

Location:Home > Lift check valve

Stainless Steel Flange Check Valve H41W

Date:[2016-10-19]    hits: Stainless Steel Flange Check Valve H41W

Stainless Steel Flange Check Valve H41W

Lift-type check valve is to rely on the flow of the media itself and automatically open and close the valve flap, used to prevent media back flow of the valve, also known as check valve, check valve, counter-current valve, and back pressure valve. Check valve is an automatic valve, its main role is to prevent the media back, to prevent the pump and drive motor reverse, and the container media release. The check valve may also be used on a line in which the supply pressure of the auxiliary system may be increased beyond the system pressure. Check valve can be divided into swing check valve (according to the center of gravity rotation) and the lift check valve (along the axis of movement).

The function of the check valve is to allow the medium to flow in only one direction, and to prevent reverse flow. Usually the valve is automatically working, in a direction of fluid pressure, the valve flap open; the reverse flow of fluid by the fluid pressure and the valve flap valve self-acting on the seat, which cut off the flow. One internal thread check valve, butterfly check valve belongs to this type of valve,

Lift check valve which includes swing check valve and lift check valve. Swing check valve has a hinge mechanism, as well as a door like the valve flap free to lean against the inclined seat surface. In order to ensure that the valve flap to reach the seat surface each time the appropriate position, the valve flap design in the hinge so that the valve flap has enough space to open space, and the valve real, full contact with the valve seat. The valve flap can be made entirely of metal, or it can be covered with leather, rubber, or a synthetic cover, depending on the performance requirements. Swing check valve in the fully open condition, the fluid pressure is almost unimpeded, so the pressure drop through the valve is relatively small. Lift check valve valve seat is located on the valve seat sealing surface. The valve in addition to the valve can be free to lift, the rest of the same as the cut-off valve, the fluid pressure from the valve seat sealing surface lift up, the media return valve leading to the valve seat down and cut off the flow. Depending on the conditions of use, the valve flap may be of the all-metal construction, or may be in the form of a rubber pad or rubber ring mounted on the valve disc holder. Like the cut-off valve, the passage of fluid through the lift check valve is narrow, so the pressure drop through the lift check valve swing larger than the swing check valve, and the flow of swing check valve is limited Very little.


 1, the valve at both ends of the pathway to be blocked, there is dry and ventilated room. Such as long-term storage, should always check the anti-corrosion.

2, the valve should be cleaned before installation, and eliminate the defects caused in the transport process.

3, the installation must be carefully check the signs on the valve and nameplate is in line with the requirements.

4, vertical lift valve check valve should be installed in the vertical pipe.

5, lift-type horizontal valve check valve should be installed in the horizontal pipe.

6, do not make the check valve in the pipeline to withstand the weight of a large check valve should be independent support, so that the pressure generated by the pipe system.

7, the installation of the check valve, the media should pay special attention to the direction of flow should be so that the normal flow direction of the media and the direction of the arrow on the valve body is consistent, otherwise it will cut off the normal flow of media. The bottom valve should be installed at the bottom of the pump suction line.

8, General-type lift check valve should be installed in the horizontal pipeline, vertical lift check valve and the bottom valve is usually installed in the vertical pipe, and the media from bottom to top flow.

9, the check valve is closed, will produce water hammer pressure in the pipeline, will lead to serious damage to valves, piping or equipment, especially for high-pressure pipeline or high-pressure pipeline, it should cause the selection of the check valve High attention.

Design and manufacturing

GB/T12235

Connection end dimensions

Structure length

GB/T12221

Flange dimensions

JB/T79

Inspection and testing

JB/T9092

material

Carbon steel

GB/T12229

stainless steel

GB/T12230

alloy steel

Q/ZB66

Logo

GB/T12220

Availability

JB/T7928


Main parts materials and main purposes

Body

cap

Disc

The seat

Applicable medium


Suitable temperature

(≤℃)

WCB

WCB+D507Mo

WCB+D577

Water, oil, steam

425

ZG1Cr18Ni9Ti

0Cr18Ni9+
Stellite12

0Cr18Ni9+
Stellite6

Pin acids

200

ZG1Cr18Ni2Mo2Ti

CF8M+Stellite12

ZG1Cr18Ni2Mo2Ti

Phosphoric acid, acetic acid, mixed acid

200

ZG00Cr17Ni14Mo2

CF3M+Stellite12

CF3M+Stellite6

Urea, ammonium liquid and phosphoric acid

200

ZG1Cr5Mo

ZG1Cr5Mo+
Stellite12

ZG1Cr5Mo+
Stellite6

Water, oil, steam

550


The previous message:Lift check valve
The next message:Lift check valve

Related Information

Mobile site

App

主站蜘蛛池模板: 99久久国内精品成人免费 | 少妇高潮惨叫久久久久久欧美 | 精品亚洲一区二区在线播放 | 小处雏一区二区三区 | 亚洲日本在线不卡二区 | 精品久久久久久久久免费影院 | 在线观看国产亚洲 | 妇少水多18P蜜泬17P亚洲乱 | 国产午夜人做人免费视频中文 | 东北疯狂xxxxbbbb中国 | 精品区2区3区4区产品乱码9 | 亚洲精品无码AV中文字幕蜜桃 | 无止侵犯高H1V3无止侵犯 | 第一次处破女18分钟免费 | 伊人久久久久久久久久 | 国产乱妇乱子在线播视频播放网站 | 极品网红液液酱粉嫩福利照子凌酱 | 少妇厨房愉情理9伦片视频 少妇被躁爽到高潮无码久久 | 久久re视频这里精品09免费 | 久久AV喷吹AV高潮欧美 | 久久这里只有精品国产精品99 | 最近2019中文字幕MV免费看 | 特级毛片全部免费播放免下载 | 午夜视频体内射.COM.COM | 老熟风间由美AV在线一区二区 | 色欲人妻AAAAAAA无码 | 产传媒61国产免费 | qvod12| 久久国产成人午夜AV影院无码 | 有人有片的观看免费视频 | 国产免费人视频在线观看免费 | 精品区2区3区4区产品乱码9 | 美国一级黄色 | 99国产精品欲AV蜜桃臀麻豆 | 草草色| 精品无码久久久久久久久 | 一个人免费视频在线观看高清频道 | 久久视频在线视频 | 久久精品热99看二 | 女仆乖H调教跪趴 | 欧洲亚洲精品A片久久99果冻 |